Sanyo VCC-XZ200P - Manual (Page 3)

Flexible Motion Detector
The Intelligent Motion Detector enables reliable and accurate
motion detection by analyzing the “magnitude of movement”
and the “size of object” from changes in picture brightness.
When a moving object is detected, VCC-XZ200P can send an
alarm signal* to external units and/or switch to the optical zoom
mode that can be preset either to x1.0, x1.4, x2.0, or x2.6
zoom. *Only when using VA-20LAN or VA-20ST board option.
Multi-spot photometry system (64-section)
The screen is divided into 64 sections on which luminous inten-
sity is measured separately to determine the lighting/backlight
conditions of all objects. This makes it possible to apply opti-
mum backlight compensation even for peripheral objects and
moving objects.
Privacy Masking
When there is a house or even an
object as small as a window within
the camera frame, it is possible to
mask the area so that it will not
appear on the monitor screen to pro-
tect other people’s privacy. Up to
4 rectangular masks of arbitrary size
can be set per screen. These masking areas may be protected
with a 4-digit (max.) password.
AC / DC Power Source Compatibility
VCC-XZ200P comes with power supply terminals of 24 V AC
(50 Hz, ±10%) and 12 to 15 V DC. The unit automatically
recognizes and switches to the correct mode when power is
supplied.
Camera Control Unit VAC-70 (sold separately)
The remote setup capability of the unit gives a feeling that the
user has the camera right beside the monitor, providing an
on-screen menu for everything needed to set up VCC-XZ200P.
(Intelligent digital motion detector, backlight compensation,
white-balance, etc.)
SSP+Twisted pair board VA-20ST
(sold separately)
Coaxial control : SSP / H-SSP / PELCO-C
RS-485: SSP / PELCO-D
Twisted pair terminal (CAT5) for video signal:
NVT built-in UTP video
Heater board VA-50H
(sold separately)
The heater board protects the camera from cold weather.
It allows the camera to operate at temperatures as low
as -30°C. (24 V AC only)
Network Recorder VA-SW3050
(sold separately)
NOTE: The VA-20LAN and the VA-20ST cannot be used concurrently.
Compression
Picture resolution
Picture quality
Frame rate
Network protocols
Number of simultaneous log-in users
System environment JPEG
720 x 286 / 640 x 480 / 360 x 286 / 180 x 143 pixels
5 levels (Basic, Normal, Enhanced, Fine, Super Fine)
Max. 25 IPS (720 x 286)
TCP, UDP, HTTP, HTTPS, SMTP, NTP, DHCP, FTP, UPnP
Up to 16 users (admin: only by one person)
OS: Windows
® 2000 SP4 / Windows ® XP HOME/PRO SP2
CPU: Pentium ® 4 2.0GHz or later
Memory: 512MB or more
Display: 1,024 x 768 pixels, 16-bit color
Browser: Internet Explorer 6.0 or later
Network Recorder VA-SW3050
(sold separately)
Network Recorder
VA-SW3050
Network board VA-20LAN
(sold separately)
This expansion board for LAN connection enables SANYO
color CCD cameras to connect to a network. The user can
operate a network connected camera using a web browser
(Internet Explorer). It comes with the VA-SW3050LITE
viewer software.
The network recorder VA-SW3050 is an application program that
extends the network operation of the camera. By installing this
software and the VA-20LAN board in each SANYO camera, it is
possible to monitor images from multiple cameras in a split
screen and access and operate up to 128 cameras over a net-
work. This is in addition to standard features such as monitoring
and recording live images, playing back recorded video, etc. It is
an exclusive software package for CCD cameras that even
enables alarm and timer recordings.
Expandability
An optional expansion board adds a network
connection to the camera to expand the system’s
capability.
SYNC
BLC
IRIS
WHITE BALANCE
AGC GAIN
GAMMA
SHUTTER
APERTURE
DAY/NIGHT
OPTION
PRESET
MENU INT
OFF
SET
ATW
NORM
0.45
6.0
NORM
AUTO
SET
OFF
END