Sony STR-DG500 User Manual
Page 72
72
GB
F:\Sony SEM
HA\Revision5_DG500\JC060283_2662258132DG500_GB\2662258132\GB05AMP_STR-DG500-
CEL.fm
masterpage: Left
STR-DG500
2-662-258-13 (2)
Models of area code AR, KR
Stereo Power Output
1)
, Reference Power
Output
1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
85 W + 85 W
1)
,
70 W + 70 W
3)
, 110 W/ch
8 ohms 1 kHz, THD 0.7%
100 W + 100 W
1)
,
90 W + 90 W
3)
, 120 W/ch
8 ohms 1 kHz, THD 10%
125 W + 125 W
1)
,
110 W + 110 W
3)
,
150 W/ch
Models of area code TH6
Stereo Power Output
1)
, Reference Power
Output
1)2)
8 ohms 20 Hz – 20 kHz, THD 0.09%
70 W + 70 W
1)
,
60 W + 60 W
3)
, 90 W/ch
8 ohms 1 kHz, THD 0.7%
80 W + 80 W
1)
,
70 W + 70 W
3)
, 100 W/ch
8 ohms 1 kHz, THD 10%
100 W + 100 W
1)
,
90 W + 90 W
3)
, 125 W/ch
1)
Measured under the following conditions:
2)
Reference power output for front, center, surround
and surround back. Depending on the sound field
settings and the source, there may be no sound
output.
3)
Measured under the following conditions:
Frequency response
Analog
10 Hz – 70 kHz
+0.5/–2 dB (with sound
field and tone bypassed)
Inputs
Analog
Sensitivity: 500 mV/
50 kohms
S/N
4)
: 96 dB
(A, 500 mV
5)
)
Digital (Coaxial) Impedance: 75 ohms
S/N: 100 dB
(A, 20 kHz LPF)
Digital (
Optical
)
S/N: 100 dB
(A, 20 kHz LPF)
Outputs (Analog)
AUDIO OUT
Voltage: 500 mV/10 kohms
SUB WOOFER
Voltage: 2 V/1 kohm
Tone
Gain levels
±6 dB, 1 dB step
4)
INPUT SHORT (with sound field and tone
bypassed).
5)
Weighted network, input level.
FM tuner section
Tuning range
87.5 - 108.0 MHz
Intermediate frequency
10.7 MHz
Useable sensitivity
11.2 dBf, 1 µV/75 ohms
S/N
Mono/Stereo
76 dB/70 dB
Harmonic distortion at 1 kHz
Mono/Stereo
0.3%/0.5%
Separation
45 dB at 1 kHz
Frequency response 30 Hz – 15 kHz,
+0.5/–2 dB
Area code
Power requirements
U, CA
120 V AC, 60 Hz
CEL, CEK, AR, KR,
TH6, SP
230 V AC, 50 Hz
E2, AU
240 V AC, 50 Hz
TW
110 V AC, 60 Hz
Area code
Power requirements
AR, KR, TH6
220 V AC, 50 Hz
GB01COV_STR-DG500-CEL.book Page 72 Thursday, March 16, 2006 12:10 PM