Other functions, Changing the sound settings, Adjusting the sound characteristics - bal/fad/sub – Sony CDX-GT414U User Manual
Page 11: Customizing the equalizer curve - eq3, Adjusting the sound characteristics, Bal/fad/sub customizing the equalizer curve, On 11, Other functions changing the sound settings
11
Listening to music on a Mass
Storage Class type audio device
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
To return to normal play mode, select “
OFF”
or “SHUF OFF. ”
Listening to music on “Walkman”
(ATRAC Audio Device)
1
During playback, press (MODE)
repeatedly until the desired setting
appears.
The item changs as follows:
ALB (Album)
t ART (Artist) t PLY
(Playlist)
Repeat and shuffle play
1 During playback, press (3) (REP) or (4)
(SHUF) repeatedly until the desired setting
appears.
To return to normal play mode, select “
OFF”
or “SHUF OFF. ”
Other functions
Changing the sound settings
Adjusting the sound
characteristics — BAL/FAD/SUB
You can adjust the balance, fader, and subwoofer
volume.
1
Press the select button repeatedly
until “BAL,” “FAD” or “SUB” appears.
The item changes as follows:
LOW*
1
t MID*
1
t HI*
1
t
BAL (left-right)
t FAD (front-rear) t
SUB (subwoofer volume)*
2
t AUX*
3
*1 When EQ3 is activated (page 11).
*2 When the audio output is set to “SUB”
(page 12).
“ATT” is displayed at the lowest setting, and can
be adjusted up to 20 steps.
*3 When AUX source is activated (page 12).
2
Rotate the volume control dial to
adjust the selected item.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
With the card remote commander
In step 2, to adjust the selected item, press
<, M, ,
or
m.
Customizing the equalizer curve
— EQ3
“CUSTOM” of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press (EQ3)
repeatedly to select “CUSTOM.”
2
Press the select button repeatedly
until “LOW,” “MID” or “HI” appears.
3
Rotate the volume control dial to
adjust the selected item.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
Repeat steps 2 and 3 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Select
To play
TRACK
track repeatedly.
ALBUM
album repeatedly.
SHUF ALBUM
album in random order.
SHUF DEVICE
device in random order.
Select
To play
TRACK
track repeatedly.
ALBUM
album repeatedly.
ARTIST
artist repeatedly.
PLAYLIST
playlist repeatedly.
SHUF ALBUM
album in random order.
SHUF ARTIST
artist in random order.
SHUF PLAYLIST
playlist in random order.
SHUF DEVICE
device in random order.
continue to next page
t