Sony Universal Remote User Manual

Page 134

134/138

Troubleshooting

• Operations are not guaranteed for all servers.

Also, operations differ depending on the

features of the server and the content in

question.

• Turn the connected device on.

Check Connections

• Check that the LAN cable and/or mains lead/

AC power cord of the server has not become

disconnected.

Check Settings

• Check that the connected device is registered

• Check that the server is correctly configured.
• Check that the selected device is connected

to the network and can be accessed.

• If the “IP Address Settings” in “Network”

under “Network Settings” is set to “DHCP

(DNS automatic)” or “DHCP (DNS manual)”, it

may take some time to recognise devices if

there is no DHCP server. Execute “Server

The TV cannot be found from renderer-

compatible device (the controller)
Check Connections

• Check that the LAN cable and/or mains lead

of the server has not become disconnected.

Check Settings

• Check if the “Renderer Function” is activated