Samson VR88 - Manual (Page 6)

4
Introduction
Congratulations on your purchase of the VR88 velocity ribbon microphone
from Samson Audio! The VR88 features a fine, pure aluminum corrugated
foil ribbon suspended within an intense neodymium field producing a warm
and natural response that's silky smooth from bottom to top. The VR88
combines the sweetness of traditional classic ribbon technology with the
precision and versatility of advanced condenser microphone head-amplifier
electronics. Like a modern condenser microphone, the VR88 operates on
standard 48-volt phantom power. This provides the VR88 with a high output
that’s compatible with any mic pre amplifier. Unlike old ribbon microphones,
you don’t have to worry about impedance mis-matches and the VR88 has no
problems with long cable runs. The VR88 is capable of handling high sound
pressure levels (135 dB), making it an excellent choice for miking vocals, as
well as acoustic instruments and even percussion or loud guitar amplifier
stacks.
In these pages, you’ll find a detailed description of the features of the
VR88 Studio Condenser Microphone, as well as step-by-step instructions
for its setup and use, and full specifications. You’ll also find a warranty
card enclosed—please don’t forget to fill it out and mail it in so that you
can receive online technical support and so we can send you updated
information about these and other Samson products in the future. Also,
be sure to check out our website (www.samsontech.com) for complete
information about our full product line.
With proper care, your VR88 will operate trouble free for many years. We
recommend you record your serial number in the space provided below for
future reference.
Serial number: ____________________________________
Date of purchase: __________________________________
Should your unit ever require servicing, a Return Authorization number (RA)
must be obtained before shipping your unit to Samson. Without this number,
the unit will not be accepted. Please call Samson at 1-800-3SAMSON (1-800-
372-6766) for a Return Authorization number prior to shipping your unit.
Please retain the original packing materials and if possible, return the unit
in the original carton and packing materials. If you purchased your Samson
product outside the United States, please contact your local distributor for
warranty information and service.