Sanyo VCC-9700P - Manual (Page 4)

Applications
Available in Three Types:
Outdoor, Surface or In-Ceiling
The camera is available in three different styles. Assemble them with
different fittings and covers to make the camera most suitable for your
surveillance needs.
Easy-to-Manage Installation,
Setup and Adjustment
Enclosed within the housing are an integrated lens, a motor
and a pan/tilt mechanism. Attachment to the power supply
base by simply sliding the release levers simplifies installation
at the point of surveillance. The settings circuit board is detach-
able for access to protocol, address and other switch settings,
and the VAC-70 controller (sold separately) and can be connec-
ted after installation to allow adjustment of PTZ control and
other settings from an on-screen menu.
Mounting Brackets
Options (Sold separately)
VA-80F
Surface type
VA-80BP
Pendant mounting
bracket (Indoor use)
Use when suspending the
camera from a ceiling.
VA-80A
Attachment
(Indoor use)
Use when mounting the
camera with VA-80F on
VA-80BP or VA-80BW.
VA-80BW
Wall mounting bracket
Use when installing the
camera to a wall.
VA-80AC
Corner mounting adaptor
Use with the VA-80BW when
installing the camera to a
surface such as the corner
of a wall.
VA-80AP
Pole mounting adaptor
Use with the VA-80BW when
installing the camera to a pole.
VA-CM8C
Clear dome cover
for outdoor housing
(Sold separately) VA-CM8S
Smoked dome cover
for outdoor housing
(Sold separately)
VA-80ME
In-ceiling type
VA-80MF VA-80EX
Outdoor type
Model number codes
Camera type
8 36x, Day/night
7 36x, Color
6 30x, Day/night
5 30x, Color
Dome cover
C Clear cover
S Smoked cover
Power
3 0 AC230V
0 0 AC24V
Housing type
I N Surface cover
E M In-ceiling (closed)
E F In-ceiling (open)
E X Outdoor housing
Scanning system
P PAL Terminal side
(Side-A) DIP switch side
(Side-B)
Alarm inputs (8)
Alarm outputs (2)
RS-485A/RS-485B Address setting
Baud rate setting
RS-485/Coax setting
SSP/Pelco setting
Termination setting
Camera Unit/Power Supply Base
Mounting Brackets (Sold separately)
VA-80BP
Pendant Mounting
Bracket
Housings (Sold separately)
VA-80EX
Outdoor Housing
VA-CM8C
Clear dome cover for outdoor housing
VA-CM8S
Smoked dome cover for outdoor housing
VA-CZ80
Smoked dome cover for indoor housing
VA-80F
Surface Cover
Dimensions Unit: mm (inch)
Model configurations example
Model name
VCC-9800EXCP
VCC-9530EFCP
VCC-9700INSP
Camera unit
VCC-MC800P
VCC-MC500P
VCC-MC700P
Power basement
VA-84S
VA-80S
VA-84S
Housing
VA-80EX
VA-80MF
VA-80F
Dome cover
VA-CM8C
VA-CZ80
+ + +
VA-80BW
Wall Mounting Bracket VA-80A
Attachment VA-80AP
Pole Mounting Adaptor VA-80AC
Corner Mounting Adaptor
VA-80ME
In-Ceiling Bracket
(closed type)
VA-80MF
In-Ceiling Bracket (open type)
In-ceiling bracket In-ceiling bracket
4-ø4.5 (0.2)
P.D ш168 (6.6)
ш137.4 (5.4)
ш147.5 (5.8)
ш186 (7.3)
ш136 (5.4)
57.3 (2.3)
107.2 (4.2)
191.5 (7.5)
45 (1.8)
ш194 (7.6)
300 (11.8) 329 (13.0)
ш96 (3.8)
ш130 (5.1)
ш192 (7.6)
ш109.7 (4.3)
ш96.5 (3.8)
239.8 (9.4)
191.5 (7.5)
191 (7.5)
ш190.2 (7.5)
ш28.5 (1.1)
ш216 (8.5)
101.1 (4.0) 111.5 (4.4)
ш216 (8.5)
51.3 (2.0)
152 (6.0) 162.5 (6.4)
4-ш8.5 (0.3)
P.D ø101.6 (4.0)
45 °
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
Camera unit
with clear dome cover (standard)
(Smoked dome cover [VA-CZ80] option)
Camera unit
Surface cover
Outdoor housing
Release
lever
(Closed type) (Open type)
IP66
Rated
24 V AC / 230 V AC
24 V AC
VA-84S
Power supply base
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
VCC-MC800P
VCC-MC700P
VCC-MC600P
VCC-MC500P
24 V AC
VA-84S / 80S
Power supply base
24 V AC / 230 V AC
VA-84S / 80S
Power supply base
ш248 (9.8)
ш146
(5.7)
ш224 (8.8)
Dome Cover
265.1 (10.4)
192 (7.6) 181.6 (7.1)
6 (0.2)
+
+
+
+
+
+
+
+
A wide selection of options is available — covering camera performance, housings, mounting brackets and more —
for a match to the application of your choice. Installation work and maintenance is now easier than ever before.
Slide the camera unit’s two release
levers and lock the power supply base
into position. No special tools required
for camera unit installation or removal.
Basic camera settings
can be made while hold-
ing the settings circuit
board in hand, as the
board is detachable from
the power supply base.
The I/O side of the board
features 8 input and 2
output terminals for
alarm signals.
Safety Cable
Equipped with a
safety cable that
connects the hous-
ing and power sup-
ply base to prevent
the camera unit from
falling.
Detachable without
disconnecting power cable Detachable Settings
Circuit Board
90˚
119 (4.7)
260.4 (10.3)
172.8 (6.8)
100 (3.9)
193 (7.6)
127 (5)
193 (7.6)
50 (2.0)
ш85–ш165 (3.3–6.5) (TBD)