Security system operation – Subaru Impreza 2.2L MT User Manual
Page 47

IMPREZA U.S.A. (E)
1-16
J
Security system operation
IMPORTANT
Security System and Keyless Entry Features Do Not Operate when
the Vehicle Ignition is on.
B
Arming the system
HS1000DB
To arm the system, close all doors, then press the “LOCK” button. The
siren will “chirp” twice and the parking lights will flash twice, indicat-
ing the system is armed.
The doors will also lock at this time. The status indicator will blink
steadily, once per second.
If the siren chirps and/or the parking lights flash only
once
, this indi-
cates that the system is in
pre-arm mode
. The system has detected
that a protected entrance is not secured. In pre-arm mode, the status
indicator stays on and does not blink. Check to see that all vehicle
entrances are closed securely. Once all entrances are secured, the
system will chirp/flash again, and the status indicator will blink
steadily. The system is now fully armed.