Smooth Fitness 9.35HR - Manual (Page 37)

www.smoothfitness.com 37
TROUBLESHOOTING
NOTE: Do not touch any internal electric wires without consulting the manufacturer.
Treadmill will not start:
Symptom Resolution
Treadmill will not power up Check the following:
Make sure the power cord is plugged into a
surge protector, the surge protector is
plugged into a properly grounded outlet and
the surge protector is turned on (refer to the
Power Requirements section in this manual).
Equipment circuit breaker is in the reset
position
Equipment power switch is in the on position
Safety key is properly inserted into the
computer console
Wall outlet is properly functioning with correct
voltage (Have an electrician check for
inadequate voltage at the outlet refer to the
Power Requirements section in this manual)
House circuit breaker is reset and is the
proper size. (refer to the Power
Requirements section in this manual)
Treadmill stops operation during use Safety key is properly inserted into the
computer console
Equipment circuit breaker is in the reset
position
House circuit breaker is reset, meets proper
requirements and if worn replaced by an
electrician. (refer to the Power Requirements
section in this manual)
Program time has expired
Treadmill will not incline(Power fold models only) Check for proper positioning of spring knob for
folding(See procedure in owners manual)
Treadmill will not unfold Power Fold only
Check for proper positioning of spring knob
for folding(See procedure in owners manual)
Manual Fold only
Folding locking lever is depressed
Treadmill running belt moves slower than speed
displayed on computer Metric/English conversion (See owners manual
for Metric/English conversion process)
Treadmill running belt moves slower than speed
displayed on computer Metric/English conversion (See owners manual
for Metric/English conversion process)
Running belt is not centered Treadmill is properly leveled(See procedure
in owners manual)
Center running belt (See Centering
procedure in owners manual)
Running belt is slipping or hesitating while in use Tension running belt (See process in owners
manual)
Treadmill running belt moves slower than speed
displayed on computer Metric/English conversion (See owners manual
for Metric/English conversion process)
Running belt is not centered Treadmill is properly leveled(See procedure
in owners manual)
Center running belt (See Centering
procedure in owners manual)
Running belt is slipping or hesitating while in use Tension running belt (See process in owners
manual)