Smooth Fitness 9.35HR User Manual
Page 20
20
9.35HR TREADMILL
ASSEMBLY
STEP 3: ASSEMBLE THE SIDE HANDLEBARS
NOTE: SIDE RAILS ARE INTERCHANGEABLE FOR USE IN BOTH RIGHT AND
LEFT SIDES. MAKE SURE ALL WIRES RECESSED INTO THE FRAME. DO
NOT TRAP OR PINCH.
(A) Connect the Left Motion Control lower wire to the middle wire (207 to 309). As
Shown in the diagram below.
(B) Insert the Left Handlebar (201) into the Upright Tube (301). Using one M8x16mm
Bolt (804) to secure the upper portion. Use two M8x50mm Bolts (805) to secure
the lower portion to the base frame, and use two M8x50mm Bolts (805) to secure
the middle portion to the upright.
(C) Repeat the above process for the Right side.
804
X2
805
X8
207
309
See also other documents in the category Smooth Fitness Sports and recreation:
- LED 12 (10 pages)
- MOTORIZED 9.45ST (38 pages)
- 7.6HR PRO (34 pages)
- 6.25 (33 pages)
- SB4 (23 pages)
- 4.25 (29 pages)
- 5.25 Motorized Treadmill (38 pages)
- 5.25 Motorized Treadmill (6 pages)
- 9.45TV (42 pages)
- Smooth EVO FX25 (38 pages)
- DMT X2 (45 pages)
- Smooth 9.25x (49 pages)
- 9.15HR (34 pages)
- 5.15P (26 pages)
- ELLIPTICAL TRAINER CE-8.0LC (37 pages)
- SMT9.2HR (20 pages)
- SMT9.2P (19 pages)
- SM9.3HR (31 pages)
- SM9.3HRST (31 pages)
- 675 (40 pages)
- 5.3P (17 pages)
- 7858-699 (12 pages)
- SX4 (30 pages)
- 5.65I (28 pages)
- 9.45ST (37 pages)
- 835 (46 pages)
- ELLIPTICAL CE-3.6 (41 pages)
- CE-8.0LC (44 pages)
- CE 2.1 (38 pages)
- 935 (45 pages)
- 5.45 (45 pages)
- 5.25 (33 pages)
- 9.1 SERIES (23 pages)
- CE 3.2 (38 pages)
- 9.25X (34 pages)
- EVO 2CD (40 pages)
- V380 (48 pages)
- 5.65S (41 pages)
- 7.35 R (39 pages)
- 9.65LC (37 pages)
- 9.17HRO (32 pages)
- SMOOTH 9.6H (21 pages)
- CE-3.0 (34 pages)
- 9.6P (16 pages)