Dot1x system-auth-control, Dot1x default, Dot1x system-auth-control -108 dot1x default -108 – SMC Networks TIGERSWITCH SMC6752AL2 User Manual
Page 348
C
OMMAND
L
INE
I
NTERFACE
4-108
dot1x system-auth-control
This command enables 802.1X port authentication globally on the switch.
Use the no form to restore the default.
Syntax
[no] system-auth-control
Default Setting
Disabled
Command Mode
Global Configuration
Example
dot1x default
This command sets all configurable dot1x global and port settings to their
default values.
Command Mode
Global Configuration
Example
Console(config)#dot1x system-auth-control
Console(config)#
Console(config)#dot1x default
Console(config)#