Sony IC RECORDER ICD-SX750 - Manual (Page 70)

ICD-SX750 4-157-612-13(1)
0
GB
To cancel the alarm setting
Follow steps 1 and 2 of “To change the
alarm setting.” In step 3, select “CANCEL”
and press  . “CANCEL ALARM?” is
displayed. Press  or  to select
“YES,” then press  . The alarm will be
cancelled and the alarm indicator will
disappear from the display window.
Notes
You can set only one alarm each one
message.
When the clock has not been set or no
messages are recorded, you cannot set the
alarm.
When “
” is displayed for the folder
indicator, you cannot set the alarm (page 67).
The alarm sounds even if you set “BEEP” to
“OFF” in the menu (page 90).
If the alarm time comes during recording,
the alarm will sound after the recording is
finished. “
 ” will flash when the alarm time
comes.
If the alarm time comes while you are
erasing a message, the alarm will sound after
the operation is finished.
If the alarm time comes while you are
updating data, the alarm will be cancelled
automatically.
If more than one alarm time comes, only
the first message will be played back with
an alarm.









Once the alarm is set, the alarm will not be
cancelled, even after the message is played
back.
If the alarm time comes while another
message is being played back with an alarm,
the payback stops and the new message will
be played back.
If the alarm time comes when you are
setting the menu, the alarm will sound and
the menu operation will be cancelled.
If you divide a message you have set an
alarm for, the alarm setting remains on only
the first part of the divided message.
If you delete a message on which you
have set an alarm, that alarm will be also
cancelled.




