Sprint Nextel Digital Voice DVP 403 - Manual (Page 22)

Chapter 3: Chapter 3: Chapter 3: Chapter 3: Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running
18 18 18 18 – – – – ◆ ◆ ◆ ◆ – – – – Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Getting the Voice Mail System Up and Running Issue 1.6 Issue 1.6 Issue 1.6 Issue 1.6
•
Set date and time.
•
Set answer schedule table with holiday schedule.
•
Set each dial action table that is used.
•
Record main greetings
•
Disable mailboxes that are not in use. Be sure to set each unused
mailbox’s Message Limit to zero (0).
•
If message wait indication is desired, make sure that port 2 on
Sprint
® ® ® ®
Digital Voice unit is connected. If you have installed a DVP
– 403, but initially are using only ports 1 and 2, disable message
notification on ports 3 and 4. This will allow the voice mail system
to operate properly.
•
Assign mailbox names for dial by name directory.
•
Record mailbox names for use until subscribers can enter their
mailboxes and record their names.
•
Assign system administrator’s mailbox for vendors.