Sanyo PLC-XF35N - Manual (Page 22)

22
KEYSTONE ADJUSTMENT
1 Press KEYSTONE ▲ / ▼ button on Remote Control Unit or select
Keystone on SETTING menu. (Refer to page 39.) Keystone
dialog box appears.
2 Correct keystone distortion by pressing KEYSTONE ▲ / ▼ button
or POINT UP/DOWN button(s). Press KEYSTONE ▲ button or
POINT UP button to reduce upper part of image, and press
KEYSTONE
▼ button or POINT DOWN button to reduce lower
part.
Reduce upper width with KEY STONE ▲ button or
POINT UP button.
Reduce lower width with KEY STONE ▼ button or
POINT DOWN button.
If a projected picture has keystone distortion, correct image with KEYSTONE adjustment.
ADJUSTING SCREEN
Message disappears after 4 seconds.
Message disappears after 4 seconds.
Zoom
Focus
ZOOM ADJUSTMENT
FOCUS ADJUSTMENT
1 Press ZOOM ▲ / ▼ button on Top Control or on Remote Control
Unit. Message “Zoom” is displayed.
2 Press ZOOM ▲ button to make image larger, and press ZOOM
▼ button to make image smaller.
1 Press FOCUS ▲ / ▼ button on Top Control or on Remote Control
Unit. Message “Focus” is displayed.
2 Adjust focus of image by pressing FOCUS ▲ / ▼ button(s) .
BASIC OPERATION
Message disappears after 4 seconds.
Lens shift
LENS SHIFT ADJUSTMENT
1 Press LENS SHIFT button on Top Control or on Remote Control
Unit. Message “Lens shift” is displayed.
2 Press POINT UP button to move image up, press POINT DOWN
button to move image down.