Presetting radio stations – Sherwood TX-5090C User Manual
Page 10

10
ENGLISH
PRESETTING RADIO STATIONS
You can store up to 30 preferred stations in the memory.
When using the PRESET NUMERIC buttons on the
front panel,
Example)When selecting “9” : 9
When selecting “12” : 1
2
within 2 sec.
If "MEM" goes off, start from the step 2 again.
When selecting the PRESET NUMERIC buttons, the
station is memorized automatically without
pressingthe “MEMORY” button.
A stored frequency is erased from the memory by
storing another frequency in its place.
If the electricity fails or the AC input cord is
disconnected for about 2 weeks, the memorized
contents are all cleared. Should this happen, memorize
them again.
”MEM” indicator flickers for 5 seconds.
Select the desired preset number.
3
Press the MEMORY button to memorize.
4
Repeat steps 1~4 to memorize other
stations.
5
Tune in the desired station with auto or
manual tuning.
Example)When memorizing FM broadcast
of 91.9MHz in preset memory.
1
Press the MEMORY button.
2
ST TUNED
MEM
MHz
ST TUNED
MHz
ST TUNED
MEM
MHz