Lab test report, Samsung clp-670nd – Samsung CLP-670ND User Manual
Page 10
Lab Test Report
Samsung CLP-670ND
BUYERS LAB
BUYERS LAB
10
BuyersLab.com
© 2010 Buyers Laboratory Inc. Duplication in any manner is illegal and strictly forbidden without written permission
from Buyers Laboratory. Violators will be prosecuted.
To purchase reprints, contact BLI at [email protected].
Print Density
Samsung CLP-670ND
1.41 to 1.49
Density for devices in this class tested to date
1.00 to 1.94
Measurements are based on four readings corresponding to four different solid black
locations on the output. The higher the density reading, the darker the image.
Visible Halftone Range
Samsung CLP-670ND
1% to 95%
Typical range for competitive devices
4% to 96%
The halftone test target contains blocks of increasing halftone dot-fill levels (1% to 100%
in 1% increments).
COLOUR/BLaCk PRiNT PRODUCTiViTy
GOOD
Productivity using the PostScript driver to print BLI’s job stream, which replicates
typical office usage in a multi-user environment, in colour and black mode is com-
petitive compared with A4 colour laser/LED printers in this speed range and class
tested to date.
Productivity using the PCL driver to print the job stream in colour and black mode is
above average for the group.
Productivity when printing multiple sets in colour and black simplex modes is com-
petitive for the group.
— Productivity when printing multiple sets in both duplex modes is below average for
the group.
Colour first-print times for the Word, PowerPoint, TIFF and JPEG files are faster than
average for the group, while those for the PDF file are competitive.
First-print time from overnight sleep is among the fastest in the group.
First-Print Time from Overnight Sleep Mode in Seconds
Samsung CLP-670ND
19.76
Average for devices in this class tested to date
38.22
Device sits idle overnight; a single-page black Word document is then sent. First-print time indicates the time it
took to RIP, image and deliver the first page of the test document to the output tray.
0
1.0
0.5
CLP-670ND
Print Density
2
1.5
Range for
tested units
BuyersLab.com
©2010 Buyers Laboratory Inc. Reproduced by permission of Buyers Laboratory Inc. Any duplication of this report without the written
permission of Buyers Laboratory, is unlawful and violators will be prosecuted. To purchase reprints, contact BLI at at [email protected].