Smeg ST147 - Manual (Page 11)

User instructions
10
8
HALF LOAD BUTTON
Press this button to activate the half load wash option.
9
HALF LOAD LIGHTS
One of the two light illuminates to indicate that the half load wash
option in the top or bottom basket has been selected.
10
PROGRAM DELAY BUTTON
Press this button to delay the start of the program by up to 9 hours.
11 INFORMATION DISPLAY
SETTING THE WASHING PROGRAM AND SWITCHING ON
To select the most suitable program for the dishes to be washed refer to
the table below, which indicates the most appropriate program according
to dish type and degree of soiling.
After using the table to identify the most appropriate washing program:
• press
the
ON/OFF button (1) and wait for the PROGRAM
INDICATOR LIGHT (2) to illuminate;
• keep pressing the PROGRAM SELECTION button (3) until the
indicator light corresponding to the desired program illuminates;
• close the door; after about 2" the program will start. While it is in
progress, the relative
LIGHT will flash (indicating that the program is
being executed).