Sharp Aquos LC 57D90U - Manual (Page 56)

55
Useful adjustment settings
Changing the secret number
Allows you to change your current secret number.
Repeat steps 1 to 3 in Setting a secret
number.
• The secret number setting menu displays.
Press a/b to select “New Secret No.”, and
then press ENTER.
Input the old 4-digit number you have set
using 0 – 9.
MENU [Setup ... Parental CTRL ... Secret No.]
New Secret No.
Secret No. Clear
New Secret No. – – – –
Input Secret No. – – – –
Reconfirm – – – –
Input the new 4-digit number using 0 – 9.
Input the same 4-digit number on the
“Reconfirm” screen as in step 6 to confirm.
Clearing the secret number
Allows you to clear your secret number.
Repeat steps 1 to 3 in Setting a secret
number.
• The secret number setting menu displays.
Input the 4-digit secret number by using 0 –
9.
Press a/b to select “Secret No.”, and then
press ENTER.
Press c/d to select “Yes”, and then press
ENTER.
• Your secret number is cleared.
Press a/b to select “Secret No. Clear”, and
then press ENTER.
NOTE
• See page 54 for re-registering with a new secret number
after being cleared.
• As a precautionary measure, make a note of your
secret number and keep it in a familiar place.
• If the secret number is cleared, the Status setting
automatically sets to “Off”. “V-Chip” and “Status” will not
be selectable from the menu.
Press a/b to select “Secret No.”, and then
press ENTER.
Input the 4-digit secret number by using 0 –
9.
1
2
3
4
5
6
7
1
2
3
4
5
New Secret No.
Secret No. Clear
Yes No
New Secret No.
Secret No. Clear
New Secret No. – – – –
Input Secret No. – – – –
Reconfirm – – – –
New Secret No.
Secret No. Clear
New Secret No. * * * *
Input Secret No.
– – – – Reconfirm
– – – –
Press MENU to exit.
8
Press MENU to exit.
6
LC-57D90U(E)-051-059 06.1.13, 2:38 PM 55
Black