Sharp Aquos LC-32GA5U User Manual

Page 12

Text mode
Original mode

Part names

RESET*

INPUT 3 terminals

SYSTEM RESET**

Antenna input terminal

* Press RESET if the TV cannot return to its original state after performing various operations.

• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel setting (Air: 2ch, Cable:1 or 2ch)
• Audio setting initializes
• Dolby virtual resets to Off
• Image position initializes

** Press SYSTEM RESET if the TV does not operate after starting up.

NOTE

• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 45 for clearing the secret number when you

know it. See page 60 for initializing to the factory preset values when you forget your secret number.

AC INPUT
terminal

RS-232C
terminal

INPUT 2 terminals

INPUT 1 terminals

INPUT 5 terminals

INPUT 4 terminal

MONITOR OUTPUT terminals

***

*** Angle seen from below.

LC-26/32GA5U(E)-01-13

04.9.15, 7:42 AM