Schumacher SC-8020A User Manual
Page 17
•
15
•
and operate normally.
Completing an interrupted charge
17.3
: If the charging process has been
interrupted and restarted after the charger displays a battery % of 85 or
more, the charger could go straight to Maintain Mode. However, if the
original charge was started using the MEDIUM TO LARGE BATTERY rate,
the charge can often be completed using the SMALL BATTERy setting.
MAiNTENANCE iNSTRUCTiONS
18.
The charger is designed and built with high quality materials requiring only
a minimum amount of care.
After use, use a dry cloth to wipe all battery corrosion and other dirt or oil
18.1
from terminals, cords, and the charger case.
Cords should be coiled when the charger is not being used to prevent
18.2
damage.
Other servicing should be performed by qualified service personnel.
18.3
The charger will draw a small amount of current from the battery(ies), a
18.4
few milliamps, when not charging or maintaining. If the battery(ies) are
going to be stored for an extended period of time (several months) without
being charged, it is best to disconnect the charger battery clamps to keep
the charger from discharging the battery(ies) over time.