Philips Saeco INCANTO SIRIUS SUP021YADR - Manual (Page 6)

INSTALLATION / VENTILATE
Fill the coffee bean container
with coffee beans.
Fill the tank with fresh drin-
king water.
Move the ON/OFF switch
to “I” to turn on the
machine.
Insert the plug into a sui-
table electric socket.
See rating plate
The “Aqua Prima” fi lter can
be installed (see pg.33).
VENTILATE
A message is displayed
indicating that the machine
circuit needs loading.
HOT WATER
VENTILATE
HOT WATER
A message is displayed
indicating that the machine
circuit has been loaded.
SELECT PRODUCT
READY FOR USE
Place a container beneath
the steam tube.
Turn the knob countercloc-
kwise to start loading the
circuit.
Wait until a steady stream
of water fl ows out from the
nozzle.
Turn the knob clockwise
to terminate the circuit-
loading process.
Remove the container. The machine is ready for
use.
Note: You must load the circuit before starting
up the machine for the first time, if it has been
inoperative for a lengthy period or if the water
tank has been completely emptied. Moreover,
the circuit must be loaded every time the
message “VENTILATE” is displayed.
The messages displayed by the machine during operation are shown
on pg.43.
Important warning for using the “Aqua Prima Filter” can be found at
page 44.
28