Philips Saeco INCANTO SIRIUS SUP021YADR - Manual (Page 19)

ENGLISH
This is a factory-set function that automatically
switches the machine into “Standby” when 3 hours
have elapsed since a coffee was dispensed.
The function is disabled when the “CLOCK”
function is on.
TIMER
The switch-off time can be adjusted, in 15-minute
intervals, to a minimum of 15 minutes.
Use the buttons to
adjust the timer setting.
When the function ap-
pears, select it using the
“OK” button.
Press the “OK” button to
confi rm your choice.
Select the MENU.
TIME SETTINGS
CLOCK
ON/OFF TIME
TIMER
TIMER
3:00
TIMER
1:15
PROGRAMMING MACHINE FUNCTIONS
TIME SETTINGS
CLEANING
CYCLE
This function is used to rinse all the coffee-
dispensing parts with water.
The rinsing cycle cannot be interrupted.
A person must be present during this operation.
Warning: a large quantity of water may be discharged
from the coffee brew unit. Before starting, empty out
the drip tray and keep an additional container handy.
Choose whether to
enable or disable the
rinsing cycle.
When the function ap-
pears, select it using
the “OK” button.
Select the MENU.
CLEANING
CLEANING
CLEANING CYCLE
DESCALING CYCLE
CLEANING CYCLE CLEANING CYCLE
YES
NO
YES
NO
Press the “OK” button
to confi rm your choice.
This function, which may be enabled or disabled
by the user, is used to program the machine to go
on and off at a specifi c time.
ON: indicates the switch on time.
OFF: indicates the switch off time.
Select the MENU. Set the hour and
minutes and memorise
by pressing “OK”.
When the function ap-
pears, select it using
the “OK” button.
Set the hour and
minutes and memorise
by pressing “OK”.
TIME SETTINGS
TIME SETTINGS
CLOCK TIME
CLOCK
ON/OFF TIME
08
ON/OFF TIME
: 25
ON/OFF TIME
ON 08 : 25 ON
09 : 45 OFF
Pressing the “OK” button will memorise the set
value and make the next parameter available for
adjustment.
ON/OFF TIME
41