Sennheiser 502874 - Manual (Page 14)

13
Putting the RS 170 into operation
Connecting the transmitter to a headphone socket
Depending on your sound source, you have to change the setting of the
ATTENUATOR switch
ቨ
in order to optimally adjust the signal of the sound
source.
̈ Adjust the volume of the headphone socket on your sound source to a
medium level. This improves the quality of wireless sound
transmission. If necessary, check the settings of your sound source.
̈
Connect the audio cable
ቫ
to the headphone socket of your sound
source.
If the plug on the audio cable
ቫ
is too small for your headphone socket,
plug the adapter to ¼“ (6.3 mm) jack plug
ቭ
onto the audio cable.
A
Music
Photos
Videos
Extras
Settings
Shuffle Songs
Portable sound source
(MP3 player, mobile telephone) Stationary sound source
(hi-fi system, amplifier)
̈
Set the ATTENUATOR switch
ቨ
to “0 dB”.
̈
Set the ATTENUATOR switch
ቨ
to “–8 dB”.
0
A
7