SPX Cooling Technologies MARLEY CLASS 800 - Manual (Page 24)

24
The tower has been designed to provide a safe working environment while
either operating or shut down. The ultimate responsibility for safety rests with
the Operator and Owner. When flow to the tower is shut off or when portions
of the tower require maintenance, temporary safety barricades may be required
around openings. Other safety precautions such as safety harnesses should
be utilized where appropriate for compliance with OSHA regulations and
standards and good safety practices.
Routine periodic maintenance must be performed on all personnel access and
material handling accessories in accordance with the following schedule:
Safety
Ladders, Stairways,
Walkways, Handrails, Covers,
Decks, and
Access Doors
Davits, Derricks, and Hoists
Inspect for General Condition Semi-annually Semi-annually
Repair for Safe Use As Required As Required