Siemens M35 or S35 - Manual (Page 5)

5
1.2. Contents of Delivery
Sets
Label Component description
G
B
0
5
1
0
1
0
G
B
0
5
1
0
1
0
A
G
B
0
5
1
0
1
1
G
B
0
5
1
0
1
1
A
GB 051 010 GSM Remote Control only ● ●
GB 051 011 GSM Remote Control with the Siemens C35i mobile phone
● ●
SA 012 602 AC/DC Adapter 220 V / 12 V DC, 600 mA, cable 1,5 m long
● ●
Connector ● ● ● ●
13 004 027 Siemens C35i mobile phone only ○ ○
13 004 028
External FME antenna reduction cable for the
Siemens C35i mobile phone
○ ○ ○ ○
ED 001 001 External 3 dB antenna with magnet, 3 meter cable ○ ○ ○ ○
ED 001 002 Flat external antenna to be glued -on glass or plastic ○ ○ ○ ○
ED 051 011
Converter for connection between a PC and the GB
051 k PC, configuration software included
○ ○ ○ ○
ED 051 050 Connector reduction for the ED 050 001 converter ○ ○ ○ ○
01 002 008 NiMH battery for the Siemens C35i mobile phone ○ ○ ○ ○
ED 050 300 Double power switch 230 V / 5 A ○ ○ ○ ○
ED 050 400
Motion detector ○ ○ ○ ○
ED 050 401
Motion detector with remote control ○ ○ ○ ○
ED 060 601
Push button connectable into a panel ○ ○ ○ ○
Note: (
●) included in the predefined set
(
○) optional accessory for the product type
2. Safety Commands
• GB 051 is conformable with technical standards for operation in our mains.
• Power source with voltage 10–16 V DC must be used for power supply. Dimension
for peak current is 500mA.
• While cover is removed parts under voltage can be exposed. Device must be
disconnected from all power sources including backup battery before maintenance
or exchange of parts or filled boards.
• While fitting together and assembling the equipment avoid cut-off of interconnecting
cables or their damage by edges.
• No fluids must enter the device. Danger of fire, destruction of device or injury by
electric current impend. In case it occurs pull power source out of the plug
immediately and consult specialist.
• Avoid forceful mechanic stress of device.
• Do not place device into rooms with high temperatures, strong vibrations or high
humidity.
• In case you moved device from cool to warm room do not set it into operation
immediately. Water condenses on device and operation under these circumstances
can cause damage of device. Let device warm up to temperature of room. Wait
until condensed water evaporates.