Sony BDV-E770W - Manual (Page 24)

24 US
Gettin
g
Star
ted
Step 3: Setting up the
S-AIR Wireless System
Before performing Step 3
Make sure all connections are secure, and then
connect the AC power cords (mains leads).
To use the S-AIR wireless system, you need to
set up the surround amplifier.
The unit transmits sound to the surround
amplifier that is connected to the surround
speakers. To activate wireless transmission,
perform the following Steps.
1
Press "/1 to turn the system on.
Make sure that “S-AIR” light up in the front
panel display. When “S-AIR” does not light
up, make sure that the wireless transceiver
is inserted into the unit correctly.
2
Set the SURROUND SELECTOR switch
of the surround amplifier to
SURROUND.
3
Set the S-AIR ID switch of the surround
amplifier to A.
4
Press "/1 to turn the surround amplifier
on.
When wireless transmission is activated,
the S-AIR/STANDBY indicator turns
green.
If the S-AIR/STANDBY indicator does not
turn green, see “Surround amplifier”
(page 11).
For details of the S-AIR function, see
“Using an S-AIR Product” (page 39).
About the standby mode
The surround amplifier enters standby mode
automatically (the S-AIR/STANDBY indicator
turns red) when the main unit is in standby mode
or wireless transmission is deactivated.
The surround amplifier is turned on
automatically (the S-AIR/STANDBY indicator
turns green) when the system is turned on and
wireless transmission is activated.
"/1
SURROUND SELECTOR
SURROUND SURROUND BACK
SURROUND SELECTOR
SURROUND SURROUND BACK
PAIRING A B C
S-AIR ID
A B C
S-AIR ID
S-AIR/STANDBY
S-AIR/STANDBY indicator
"/1