Samsung BN68-01900M-01 - Manual (Page 64)

English
An
ynet+
Recording
You can make a recording of a TV programme using a Samsung recorder.
1
Press the TOOLS button. Press the ENTERE button to select
Anynet+ (HDMI-CEC).
2
Press the ▲ or ▼ button to select Recording Immediately and press the
ENTERE button. Recording begins.
When there is more than one recording device.
When multiple recording devices are connected, the recording devices are
listed. Press the ▲ or ▼ button to select a recording device and press the
ENTERE button. Recording begins.
When the recording device is not displayed select Device List and press the
Red button to search devices
3
Press the EXIT button to exit.
You can record the source streams by selecting Recording: (device_name).
Pressing the ∏ button will record whatever you are currently watching. If you
are watching video from another device, the video from the device is recorded.
Before recording, check whether the antenna jack is properly connected to the
recording device. To properly connect an antenna to a recording device, refer
to the recording device’s users manual.
Listening through a Receiver
(Home Theatre)
You can listen to sound through a receiver instead of the TV speaker.
1
Press the TOOLS button. Press the ENTERE button to select
Anynet+ (HDMI-CEC).
2
Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select
On or Off.
3
Press the EXIT button to exit.
If your receiver supports audio only, it may not appear in the device list.
The receiver will work when you have properly connected the optical in jack of
the receiver to the DIGITAL AUDIO OUT (OPTICAL) jack of the TV.
When the receiver (home theatre) is set to On, you can hear sound output
from the TV’s Optical jack. When the TV is displaying a DTV(air) signal, the
TV will send out 5.1 channel sound to the Home theatre receiver. When the
source is a digital component such as a DVD and is connected to the TV via
HDMI, only 2 channel sound will be heard from the Home Theatre receiver.
If there is a power interruption to the TV when the Receiver is set to On (by
disconnecting the power cord or a power failure), the Speaker Select may
be set to External Speaker when you turn the TV on again.(refer to pages
28~29)
■
■
■
■
■
■
■
■
■
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move E Enter R Return
View TV
Device List
Recording: DVDR
DVDR MENU
DVDR INFO
Receiver: Off
Setup
U Move E Enter R Return
BN68-01900M-01Eng.indb 64 2009-04-13 �� 10:07:42