Simer Pumps 2430 - Manual (Page 4)

General Information 4
DESCRIPTION
This submersible pump is designed for use as a
waterfall/fountain or as a utility pump. The unit is
equipped with a 3-prong grounding-type power cord.
Ball bearings on the motor shaft never need lubrication.
Automatic reset thermal protection.
SPECIFICATIONS
Power supply required..................................115V, 60 HZ.
Motor duty .....................................................Continuous*
Liquid temperature range ...............32°F to 77°F (0°-25°C)
Individual branch circuit
requirement (minimum) .......................................15 Amps
* For continuous operation the water depth must be at
least 5” (13 cm) to prevent the motor from overheating.
NOTICE: Not designed for applications involving salt
water or brine! Use with salt water or brine will void
warranty.
For parts or assistance, call Simer Customer Service at 1-800-468-7867 / 1-800-546-7867
GPH (LPH) AT TOTAL FEET (M) No Flow
Motor 0 5 10 15 20 At Height
Model HP (0 m) (1.5 m) (3 m) (4.6 m) (6.1 m) Shown Below
2430 1/3 2,400 (9,085) 1,920 (7,628) 1,380 (5,224) 780 (2,953) 240 (908) 22’ (6.7 m)
PERFORMANCE
Motor Minimum Pumps
Motor Full Load Circuit Down
Model H.P. Amps Req. (Amps) To
2430 1/3 2.3 15 7/8” (22 mm)
Pump
Model No. Included Adapters
1-1/4” FNPT x 1-1/4”
2430
Hose Barb Elbow (P/N 007-022)
1-1/4” FNPT x 3/4”
Garden Hose Fitting (P/N ZA000900)
DISCHARGE FITTINGS CHART
ELECTRICAL SPECIFICATIONS