Product description, 1 shelves, 2 fruit and vegetable box – Smeg FAB40P User Manual
Page 5: 3 door shelves and containers, 4 cheese box, 5 inside lighting, Instructions for the user
Instructions for the User
21
4. PRODUCT DESCRIPTION
CONTROL PANEL: controls the
refrigerator and freezer section
temperatures.
Freezer compartment (B):
compartment for storing frozen foods
and for freezing fresh foods.
Refrigerator (A): compartment for
storing fresh foods.
4.1 Shelves
Each refrigerator comes complete with several shelves which can be set at different heights by placing
them on the runners provided. Each shelf has a safety fitting to prevent it from being pulled completely
out or accidentally removed. To remove it from the appliance, lift it at the back and front and pull it out.
Then change the position of the shelf or shelves as you require. For easy removal of all internal
accessories, the door has to be opened completely.
4.2 Fruit and vegetable box
These containers are at the bottom of the refrigerator compartment, which is fitted with a glass shelf to
cover fresh foods that require constant humidity for optimum storage.
4.3 Door shelves and containers
The inside of the door is fitted with special shelves and boxes to take eggs, butter, dairy products, tubes,
preserves and other small packages. The bottom of the door has a shelf to take vertical bottles. To stop
bottles from falling when the door is opened and closed, they must be secured with the special retainer
rod supplied.
All door shelves and boxes can be removed for cleaning. To remove them from the door, tap them
upward with your fist in the first on one side of the insertion zone and then on the other.
4.4 Cheese box
A special cheese box with lid is supplied (depending on model). This box can be placed on any shelf as
required.
4.5 Inside lighting
When the refrigerator door is opened, the light comes on; it remains on until the door is completely
closed again. A safety device automatically switches off the light if the door is left open for too long. The
same device switches the light on again when it no longer risks overheating.