Sony DSR-2000A - Manual (Page 89)

Chapter 4
Editing
Chapter 4 Editing
89
Quick Editing
After selecting an edit mode, you can save on editing time by setting the
edit points and previewing (or executing) the edit at the same time.
1
Press the PLAYER button, turning it on.
2
Stop the tape on the player at the position you wish to make the IN
point.
3
Press the RECORDER button, turning it on.
4
Stop the tape on the recorder at the position you wish to make the IN
point.
5
Press the PREVIEW button.
A preview starts.
The tape positions determined in steps 2 and 4 are set as the player IN
point and recorder IN point, respectively.
6
Watching the editing on the monitor, at the position you wish to make
the OUT point, hold down the ENTRY/SHIFT button and press the
OUT button.
Both the player OUT point and recorder OUT point are set.
7
Carry out another preview and modify the edit points as required.
For details of how to modify edit points, see the section “Modifying Edit
Points” (page 75).
1 3
5,7 2,4 8 6
(Continued)