Adjusting the picture settings, Selecting the picture format, Depending on the model) – Samsung 25A6 User Manual
Page 21

21
ENG
Adjusting the Picture Settings
Your television has several settings which allow you to control picture
quality:
◆ Color tone, Contrast, Brightness, Color, Sharpness, Tint
(NTSC only)
1
Press the MENU button.
Result:
The “Picture” menu is displayed.
2
Press the
+
or
–
button.
3
Press the
▲ or ▼ button to select the “Adjust”, and then press the
+
or
–
button.
Result:
The “Adjust” menu is displayed.
➣
When select the “Mode” to “Custom”, the “Adjust” menu is
displayed.
4
To adjust the...
Press the...
◆ Color tone
◆
+
or
–
button.
Result: You select the required option
(Normal, Warm1/2, Cool1/2).
◆ Contrast
◆
+
or
–
button.
◆ Brightness
Result: The horizontal bar is displayed.
◆ Sharpness
◆ Color
◆ Tint (NTSC only)
5
When you are satisfied with the settings, press the TV button, or
press the MENU button repeatedly to return to normal viewing.
➣
The television has an “automatic degaussing” system that is
activated if magnetic interference is present. To degauss the
television screen, switch power off by pressing the “POWER
”
(ON/OFF) button on the front panel (refer to “Automatic
Degaussing To Remove Colour Patches” on page 39).
➣
If you make any changes to the “Adjust” settings, the picture
standard is automatically switched to “Custom”.
Select Enter Exit
Picture
Mode Custom
Adjust
Digital NR : Off
Tilt : 0
LNA : Off
You can select the picture format which best corresponds to your
viewing requirements by simply pressing the “P.SIZE” button.
Picture format
Description
Plus
Full 12.8:9 format (extra 1 inch)
Normal
Setting for normal 4:3 format.
Zoom
Expansion of a 16:9 picture to full screen format.
16:9
Setting for the 16:9 screen format
Select Adjust Exit
Adjust
Color tone : Normal
Contrast : 100
Brightness : 50
Sharpness : 50
Color : 50
Contrast 100
Select Adjust Exit
Adjust
Color tone : Normal
Contrast : 100
Brightness : 50
Sharpness : 50
Color : 50
Selecting the Picture Format
(depending on the model)