JVC UXQD90S - Manual (Page 41)

38
Listen
in
g to Discs
En
glis
h
2
Press to select a group.
3
Press to move to the track list.
• Pressing returns to the group list.
4
Press to select a track.
5
Press or .
Example: For MP3 (during playback)
• At first, a track title (file name) is scrolled.
• When an MP3 or WMA is loaded, tag information
(title/artist/album) is scrolled followed by a track
title.
• Only alphanumerical one-byte characters are
displayed properly as a track title or tag informa-
tion.
NOTE
• You can also use in step 2.
• You can also use the number buttons in step 4. In
this case, steps 3 and 5 are not needed. Refer to
“Using the number buttons” (
page 16).
• You can also use or in step 4. In this
case, step 3 is not needed.
Group number Track number
Elapsed playing time
(This indicator is not displayed
while a JPEG is loaded.)
Slide-show playback
• For a JPEG disc, when you press in step
5, files are continuously played back from the
selected file (slide-show playback). When you
press , only a selected file is played back.
• A file is displayed for approximately 3 seconds
in a slide-show playback.
• After all files are played back, the playback is
automatically stopped.
UX-QD90[UNUS].book Page 38 Thursday, September 29, 2005 1:29 PM