JVC HR-XVC41S - Manual (Page 29)

29
Operation
Playing an Playing an Audio CD or Audio CD or
MP3/WMA MP3/WMA file file
This unit can play Audio CDs or MP3/WMA files
recorded media.
MP3/ WMA/ Audio CD
Once you insert an MP3/WMA files recorded media
or Audio CD, a menu appears on the TV screen.
Press v / V to select a track/file then press PLAY or
ENTER (OK) and playback starts. You can use vari-
able playback functions. Refer to page 27-28.
ID3 TAG
• When playing a file containing information such as
track titles, you can see the information by pressing
DISPLAY. [ Song, Artist, Album, Comment, Genre ]
• If there is no information, “No ID3 TAG” appear on
the menu screen.
Tips:
• If you are in a file list on the “MUSIC” menu and
want to return to the Folder list, use the v / V to
highlight
and press ENTER (OK).
• Press DISC MENU to move to the next page.
• On a CD with MP3/WMA and JPEG you can switch
MP3/WMA and JPEG. Press TITLE and MUSIC or
PHOTO word on top of the menu is highlighted.
Programmed Playback Programmed Playback
The program function enables you to store your
favorite tracks from any disc in the player memory.
A program can contain 30 tracks.
1. Insert an Audio CD or MP3/WMA files recorded
media. AUDIO CD or MUSIC menu appears.
2. During STOP mode, press PROGRAM and
the mark will appear
Note:
Press PROGRAM again to exit the program edit
mode, then the
mark will disappear.
3. Select a track on the “List”, then press ENTER
(OK) to place the selected track on the “Program”
list. Repeat to place additional tracks on the list.
4. Select the track you want to start playing on the
“Program” list.
5. Press N (PLAY) or to start. Playback begins in
the order in which you programmed the tracks.
Playback stops after all of the tracks on the
“Program” list have played once.
6. To resume normal playback from programmed
playback, select a track on the list and then press
N
(PLAY).
Repeat Programmed Tracks
Press REPEAT to select a desired repeat mode.
• Track: repeats the current track
• All: repeats all the tracks on programmed list.
• Off(No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback,
the repeat playback cancels.
Erasing a Track from “Program” List
1. During STOP mode, press PROGRAM and
the mark will appear
2. Use v V b B to select the track that you wish to
erase from the Program list.
3. Press CLEAR (0000). Repeat step 1~3 to erase
additional tracks on the list.
Erasing the Complete Program List
1. During STOP mode, press PROGRAM and
the mark will appear
2. Use v V b B to select “Clear All”, then press .
Note:
The programs are also cleared when the power is off
or the disc is removed.
E
E
E
E
MP3 / WMA disc compatibility with this player is
limited as follows:
• Sampling frequency: within 8 - 48 kHz (MP3),
within 32 - 48kHz (WMA)
• Bit rate: within 32 - 320kbps (MP3),
32 - 320kbps (WMA)
• The player cannot read an MP3/WMA file that
has a file extension other than “.mp3” / “.wma”.
• CD-R physical format should be ISO 9660
• If you record MP3 / WMA files using software
that cannot create a file system (eg. Direct-CD)
it is impossible to playback MP3 / WMA files.
We recommend that you use Easy-CD Creator,
which creates an ISO 9660 file system.
• File names should have a maximum of 8 letters
and must incorporate an .mp3 or .wma extension.
• They should not contain special letters such as
/ ? * : “ < > l etc.
• The total number of files in a folder should be
less than 1190 files.