Return to normal screen, Engage recorder's timer mode, Attention – JVC HR-J667MS User Manual

Page 25

RETURN TO NORMAL

SCREEN

Press PROG or OK. "PROGRAM COMPLETED" appears
on the screen for about 5 seconds, then normal screen
appears.

● Repeat steps 1 – 5 for each additional programme.

ENGAGE RECORDER'S

TIMER MODE

Press TIMER. The recorder turns off automatically and
"‰" appears on the display panel.

● To disengage the timer, press TIMER again.

NOTES:

●

To Change The Stop Time . . .
. . . press STOP +/– after pressing OK in step 3. You can
compensate for anticipated programme schedule delays this
way.

●

To Timer-Record Weekly Or Daily Serials . . .
. . . after pressing OK in step 3, press WEEKLY (NUMBER key
"9") for weekly serials or DAILY (NUMBER key "8") for daily
serials (Monday – Friday). Either "WEEKLY" or "DAILY" appears
on the screen. Pressing the button again makes the corre-
sponding indication disappear.

●

You can programme this recorder to timer-record as many as 8
programmes. If you try to programme the recorder to record a
ninth, "PROGRAM FULL" appears on screen. To record the
extra programme, you must first cancel any unnecessary
programmes (

੬

pg. 28).

●

It is not possible to timer-record a TV programme with a
G-

CODE

number which starts with "0".

ATTENTION

Regarding Guide Program Number Set

"G-CODE/SHOWVIEW SETUP" appears after performing
step 3 if the Guide Program number for the G-

CODE

number

you entered has not been set.

● Press the NUMBER keys or PUSH JOG %fi to input the

channel position number on which your recorder
receives that station, then press OK or PUSH JOG .
The G-

CODE

program screen appears.

(Ex.) To timer-record a RTR
programme with G-

CODE

* If your recorder receives

RTR on the channel position
2, press OK or PUSH JOG
after entering "2".

Satellite Tuner Users

To timer-record a satellite broadcast using G-

CODE

Perform steps 1 – 6.

Set the satellite tuner to the appropriate channel before
the selected programme begins.

Leave the satellite tuner's power on.

G-CODE/SHOWVIEW SETUP

GUIDE PROG

TV PROG

– –

[0-9] OR [

5/∞]:SELECT =

[PROG] : EXIT

PUSH JOG

NUMBER

DAILY

WEEKLY

TIMER

STOP+/–

PROG