JVC HR-DD857MS - Manual (Page 37)

EN
37
NOTES:
● When monitoring the sound during Audio Dubbing, the normal
soundtrack is automatically selected. If you wish to hear the
mixed sound (Hi-Fi + Normal soundtracks), press AUDIO on
the remote control to select " + (L+R)+NORM" (
੬
pg. 15).
● Audio dubbing stops automatically when the counter reaches
"0:00:00", and the recorder enters the Play mode. Check the
counter reading before dubbing.
● Audio dubbing is also possible using the rear panel AUDIO
IN L + R connectors. When using these connectors, make
sure to select the correct input mode in step 2.
● Audio dubbing cannot be performed on a cassette that has
had its record safety tab removed.
● When playing back an audio-dubbed tape, press AUDIO on
the remote control to select the soundtrack you wish to hear
(
੬
pg. 15).
START DUBBING
5
Engage the audio component's Play mode, then press
PLAY to start the tape in your recorder. Audio dubbing
begins at this point.
● " " blinks and " " is displayed on the front display
panel.
● To stop dubbing temporarily, press PAUSE. Press
PLAY to resume dubbing.
END AUDIO DUBBING
6
Press STOP to stop the tape in your recorder, and
engage the audio component's Stop mode.
1 2 3
4 5 6
7 8 9
0
2
4
1
3
PLAY
PAUSE
PLAY
STOP
AUDIO
PAUSE