beautypg.com

Timer recording, Timer programming – JVC HR-J291EA User Manual

Page 12

background image

June 28, 2002 2:54 pm

Page 12

— 12 —

Master Page: Right

Up to 7 timer recording programmes within a month can be
made.

Before starting:

● Set the clock properly. (

7)

● Set “SYSTEM” to the appropriate mode. (

15)

● Load a cassette with the record safety tab intact.

NOTES:

Be sure to turn off the recorder before timer recording starts.

Do not perform any operations during timer recording.

If all the 7 programmes have already been set, “PROGRAM

FULL” appears on the screen.

If there is a conflict in the timer schedule and one programme

overlaps with another, the programme starting earlier will be
recorded. If the start times are the same, the programme made
most recently will be recorded.

If you wish to stop timer recording which has already started,

press

1.

After timer recording is completed, the recorder enters the

standby mode automatically.

If the tape reaches its end during timer recordings, the recorder

stops recording, rewinds the tape and ejects the cassette, then
enters the standby mode automatically.

You can programme the timer recording while a regular

recording is in progress; the menu screens will not be recorded.

Timer Programming

A

Press MENU. Press

w e to select the icon

“REC”, then press OK. The programme list
appears.

B

Press OK.

C

Press the appropriate number keys to

set the channel, date, start time and stop
time. Input “0” before any single number
entries.

● To time-record daily (Monday–Friday) or

weekly serials, press

w e to select the

“DATE” setting, then press OK. Press

w

e, then press OK.

● To set the tape speed (SP/LP/IP), press w

e to select the tape speed, then press

rt.

“Intelligent LP Recording” on page 13.

D

Press MENU. Press MENU again to return to normal screen.

E

Press

1. The recorder enters timer standby mode. The timer

indicator and standby/record indicator light on the display panel.

● If a cassette has not loaded when the recorder enters the timer

standby mode, the timer indicator blinks on the display panel.

Timer Recording

REC

HR-J291_695EA-001EN.fm Page 12 Friday, June 28, 2002 2:54 PM