JVC GC-QX3HD - Manual (Page 40)

40
EN
CAMERA SETTING
FRAME
QUALITY
Q. REVIEW
W. BALANCE
SENS.
TELEPHOTO
M. DRIVE
AF/AE
CLEAR
1024X768
FINE
ON
AUTO
80
1X
OFF
MULTI
EXE
4,5
1
OFF
M
4 SET
V
2
3,6
MANUAL SHOOTING (cont.)
Sensitivity Setting
You can change the camera's sensitivity setting when shooting at dark place or where you can not use the
flash.
1 Turn the Power dial to “M”.
•Hold the Lock button down while turning the
Power dial.
2 Select “MANUAL” with the MODE switch.
•“MANUAL” appears on the LCD panel.
3 Press the DISPLAY button until the CAMERA
SETTING screen appears.
4 Press the r t button to select “SENS.”.
5 Press the w e button to select “80”, “160” or
“320”.
6 Press the DISPLAY button to turn off the menu
screen.
NOTES:
● The sensitivity settings are ISO compliant.
● The noise may appear and increase on the screen
at the shooting if the value of the sensitivity
setting is higher.