beautypg.com

Programming the playing order of the tracks, 30 english to select a passage within a track, Locating a track with the remote control directly – JVC CATD77 User Manual

Page 34

background image

30

English

To Select a Passage Within a Track ————————————

Press the up or down cursor key continuously while a CD is playing.

Pressing the up (

¡

) cursor key advances the CD rapidly, pressing the down (

1) cursor key

plays the CD backwards rapidly. Release the cursor key at the point at which you wish to resume normal
playback.

Note:

You cannot perform these fast forwards or fast backwards operation with the Remote Control.

Locating a Track With the Remote Control Directly ———

Using the number keys on the Remote Control allows you to go directly to the beginning of any track.

1. Press the DISC (1-3) button for the disc tray containing the track

you want to listen to.

Example: for the third disc, press the DISC 3 button.

2. Enter the number of the track you want to listen to with the num-

ber keys.

The selected track starts playing.

Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For
track 32, press +10 three times, then 2.

Programming the Playing Order of the
Tracks

You can change the order in which the discs and tracks play, and select only the discs and tracks you want
from among those loaded in the CD Player.
o

You can program up to 32 steps in any desired order from among the discs in the player.

o

You can only make or change a program when the CD Player is stopped.

Using the Unit

1. Press the MENU button.

The TIMER section of the menu display blinks.

2. Press the cursor key to the right

or left (

4 or ¢) and select

“CD P.MODE”.

The menu display changes with each press of the
cursor keys as shown below.

+

Press the left (

4

) cursor key

Ô

TIMER

Ô

CD P.MODE

Ô

REPEAT

Ô

AUTO EDIT

Ô

SEA CONTROL

Ô

Press the right (

¢

) cursor key

=

3. Press the cursor key to the up or

down (

¡

or 1) and select

“PROGRAM”.

The menu display changes with each press of the
cursor keys as shown below.

+

Press the up (

¡

) cursor key

Ô

CONTINUE

Ô

PROGRAM

Ô

RANDOM

Ô

Press the down (

1

) cursor key

=

“PROGRAM” appears on the display.

4. Press the SET button.

The blinking “PROGRAM” display changes to
a steady display.

MENU

TAPE

TIMER

DAILY

1

2

3

4

5

6

7

8

TAPE

1

2

3

4

5

6

7

8

CD P. MODE

CONTINUE

TAPE

1

2

3

4

5

6

7

8

CD P. MODE

PROGRAM

SET

TAPE

CD P. MODE

PROGRAM

REPEAT

OFF

VOL

CA-TD77R[EF]/EN/p26-52

97.7.24, 2:40 PM

30

This manual is related to the following products: