JVC CA-V908T - Manual (Page 30)

26
English
Basic Operations for Continuous Play
You can play CD, CD-G, and video CD without the PBC function, in Continuous Play.
Playing order of discs
When playback starts from DISC 1, the playing order is DISC 1 = DISC 2 = DISC 3.
When DISC 3 has finished, the CD Player stops.
When playback starts from DISC 2, the playing order is DISC 2
= DISC 3 = DISC 1.
When DISC 1 has finished, the CD Player stops.
When playback starts from DISC 3, the playing order is DISC 3
= DISC 1 = DISC 2.
When DISC 2 has finished, the CD Player stops.
•
If any of the disc trays are empty, the CD Player skips that disc tray and continues through the
remaining disc trays in the order shown above. When the last disc has finished playing, the Unit
will stop automatically.
Stopping play for a moment ————————————————
Press CD £/8 (or 8 STILL on the remote control).
The playing time will flash. When playing a CD-G or a video CD, you can view a still picture on the TV
screen. If you pause a CD-G or a video CD for about 10 minutes, the still picture dims.
To resume play, press CD £/8 (or 3 on the CD Player control section on the remote control) again.
Selecting a Track —————————————————————
Press 4 or ¢ on the MULTI CONTROL to select the track.
The selected track starts playing.
Each time you press 4 or ¢ the track changes by one.
Press and hold 4 or ¢ to continuously change tracks.
Locating a Track with the Remote Control Directly ———
Using the number buttons on the remote control allows you to go directly to the beginning of any track.
1. Press the DISC 1-3 for the disc tray containing the track you want
to listen to.
• Example: for the third disc, press DISC 3.
2. Enter the number of the track you want to listen to with the
number buttons.
The selected track starts playing.
•
Example: for track 5, press 5. For track 15, press +10 then 5. For track 20, press +10, then 10. For
track 32, press +10 three times, then 2.
Fast Forward and Reverse ————————————————
Use 1 or ¡ on the MULTI CONTROL.
For Fast Forward, press and hold down ¡. For Reverse, press and hold down 1. Release the button
when the part you wish to listen to is reached.
Changing Discs While Playing ———————————————
You can replace a CD in a tray not being used, while another CD is playing.
1. Press 0 of the tray not being used.
The tray opens.
2. Replace the disc in the tray.
3. Press 0 to close the tray.
STILL
or
ONSCREEN
TEST TONE
CENTER MODE
DELAY TIME
L BALANCE R
CENTER
LEVEL
3CH LOGIC PRO LOGIC
V.INTRO
– +
REAR
LEVEL – +
EN21-31.CA-V908T[U]/f 98.7.22, 8:05 PM 26