JVC KW-AVX710 EU - Manual (Page 45)

45
EXTERNAL DEVICES
ENGLISH
Using other external components
AV-INPUT
You can connect an external component to the LINE IN/VIDEO IN terminals.
~
Press [SOURCE], then press [AV-IN]. (
☞
page 9)
• You can also use SOURCE on the monitor panel. Press it repeatedly.
Ÿ
Turn on the connected component and start playing the source.
To display the operation buttons (☞ page 20) while watching the playback picture
• If no operations are done for about five seconds, the operation buttons disappear.
• [KEY] does not work when the source is “AV-IN.”
Touch the screen (center portion).
You can easily access to <Aspect> setting
menu by pressing [SHORT CUT] on the
touch panel, then...
Assigned title (☞ page 49) Sound mode (☞ page 48)
Touch the screen (center portion).
: Buttons on the touch panel. In the explanation, they are indicated inside [ ].
These buttons also work when they are not shown on the touch panel (while watching the playback picture).
Continued on the next page
☞
page 48
EN_KW-AVX710[E]4.indb 45 EN_KW-AVX710[E]4.indb 45 07.12.7 10:44:32 AM 07.12.7 10:44:32 AM