JVC AV 56P575 - Manual (Page 46)

Initial Setup
46
Position adjustment allows you to adjust the position of the picture on the screen vertically
when the aspect is set to panorama, cinema, or full.
Press the M
ENU
button
π† To POSITION ADJUSTMENT
è To enter
π †
è To adjust the position
Press the M
ENU
button to finish
Notes:
• To reset the adjustment to the center, press the O
K
button.
• When the arrow disappears, while you are adjusting the position, the position is at it’s
maximum limit.
• If you select regular size with aspect or Multi Screen, position adjustment option is not seen.
• When you change the screen size, perform the position adjustment again.
• Position adjustment allows you to adjust the screen position vertically and horizontally when
the aspect is set HD panorama or cinema zoom for 1080i and 720p signals.
Position Adjustment
OPERATE RESET EXIT OK MENU
Power indicator allows you to adjust the brightness of the
power indicator
Press the M ENU button
π† To POWER INDICATOR
è To adjust POWER INDICATOR LOW, HIGH or OFF
Notes :
• When OFF is selected :
The LED disappears if you have a TV signal.
The LED is lit as “LOW” when there is no TV signal.
• When the On Timer turns ON, the LED is lit as "LOW" when you turn the power off.
Power Indicator
�������������
������ ������� ����
����
���������
��������
�����
����
��
���
���
������������
����������������
��������������
�����������������
�������������������
���������������
LCT1609 English 3/8/04, 11:03 AM 46