JVC UX-MD9000R - Manual (Page 9)

5
English
CAUTION: Make all connections before plugging the System into an AC power outlet.
Connecting Auxiliary Equipment
Connect an (not supplied) signal cord between the LINE IN (AUX1) terminals on the System and the output terminals of your auxiliary equip-
ment (e.g. turntable). You can listen to this source.
Unplug the cap and connect an (not supplied) optical digital cord between the System's OPTICAL DIGITAL IN (AUX2) terminal and the output
terminal of the CD player, etc.
You can listen to the digital input signal from the CD player, etc.
Connect an (not supplied) signal cord between the SUB WOOFER OUT terminal and an external JVC subwoofer system, etc.
Firmly insert the supplied AC power cord into the AC inlet on the back of the Unit.
CAUTIONS:
• ONLY USE THE JVC POWER CORD PROVIDED WITH THIS SYSTEM TO AVOID MALFUNCTION OR DAM-
AGE TO THE SYSTEM.
• BE SURE TO UNPLUG THE POWER CORD FROM THE OUTLET WHEN GOING OUT OR WHEN THE SYS-
TEM IS NOT IN USE FOR AN EXTENDED PERIOD OF TIME.
Now you can plug the AC power cord into the wall outlet, and your System is at your command!!
Connecting a CD Player, etc (Digital Input (AUX2))
Connecting a Subwoofer System
Connecting the AC Power Cord
R L
LINE IN
(AUX1)
LINE OUT
Turntable (with built-in equalizer)
(not supplied)
Signal cord (not supplied)
Pin-plug x 2 Pin-plug x 2
OPTICAL
DIGITAL IN(AUX2)
CD player, etc. (not supplied)
Cap
Optical digital cord (not supplied)
SUB WOOFER
OUT
Subwoofer system (not supplied) Signal cord (not supplied)
AC IN
Power cord
Ux-MD9000-e.fm Page 5 Tuesday, June 23, 1998 9:38 AM