JVC HR-J670EK - Manual (Page 45)

45
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
Change Station Preset
Position
SELECT ITEM
1
Press %fi @ #
until the item you want to move begins
blinking. Then press OK and the station name (ID) and
its channel (CH) number begin blinking.
SELECT NEW POSITION
2
Press %fi @ #
to move the station to the new preset
position, then press OK.
Example: If you moved the station in position 4 to
position 2, the stations originally in positions
2 and 3 each move down one space.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
SELECT ITEM
1
Press %fi @ #
until the item you want to delete begins
blinking.
DELETE CHANNEL
2
Press .
● The item directly beneath the cancelled one moves
up one line.
● Repeat steps 1 and 2 as necessary.
CLOSE CONFIRMATION SCREEN
3
Press MENU.
Delete A Channel
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
Perform steps 1 and 2 of "Storing Channels Manually" on
page 44 to access the Confirmation screen before continuing.
SELECT CHANNEL TO FINE-TUNE
1
Press %fi @ #
until the channel you want to tune begins
blinking.
ACCESS MANUAL
CHANNEL SET SCREEN
2
Press OK twice. The Manual Channel Set screen
appears.
PERFORM TUNING
3
Press
#
until "+/–" begins blinking, then press %fi until
the picture is clearest. Then press OK.
● The Confirmation screen appears.
● Repeat steps 1 through 3 as necessary.
CLOSE CONFIRMATION SCREEN
4
Press MENU.
Fine-Tuning Channels
Already Stored
PR CH ID PR CH ID
01 26 BBC1 08 – – – –
02 23 ITV 09 – – – –
03 30 CH4 10 – – – –
04 33 BBC2 11 – – – –
05 37 CH5 12 – – – –
06 – – – – 13 – – – –
07 – – – – 14 – – – –
[ 5∞ ] : MOVE
: MANUAL CH SET
[MENU] : EXIT
PR CH ID PR CH ID
01 26 BBC1 08 – – – –
02 33 BBC2 09 – – – –
03 23 ITV 10 – – – –
04 30 CH4 11 – – – –
05 37 CH5 12 – – – –
06 – – – – 13 – – – –
07 – – – – 14 – – – –
[ 5∞ ] : MOVE =
[MENU] : EXIT
5
5
5
5
SELECT DECODER MODE
1
Set "L-2 SELECT" to "DECODER" (
੬
pg. 32).
ACCESS CONFIRMATION
SCREEN
2
Perform steps 1 and 2 of "Storing Channel Manually" on
page 44.
SELECT POSITION
3
Press %fi @ #
to select the channel position broadcast-
ing scrambled programmes, then press OK twice.
CHANGE DECODER SETTING
4
Press
#
until "OFF" (decoder setting) begins blinking,
and set it to "ON" by pressing %fi.
RETURN TO CONFIRMATION
SCREEN
5
Press OK.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
When Receiving A
Scrambled Broadcast
NOTE:
Scrambled programmes are not currently broadcast in the U.K.