beautypg.com

Connections to a tv or vcr, Pg. 17), Pg. 17 – JVC GR-D94 User Manual

Page 17

background image

VIDEO PLAYBACK

VID

E

O

RECO

RDI

NG

& PLA

Y

B

ACK

EN

17

MasterPage: Video_Right

These are some basic types of connections. When
making the connections, refer also to your VCR and TV
instruction manuals.

A White to AUDIO L IN*

B Red to AUDIO R IN*

C Yellow to VIDEO IN**

D To S-VIDEO IN***

*

Not required for watching still images only.

** Connect when your TV/VCR has only A/V input

connectors.

*** Connect when your TV/VCR has S-VIDEO IN and A/V

input connectors. In this case, it is not necessary to
connect the yellow video cable.

1

Make sure all units are turned off.

2

Connect the camcorder to a TV or VCR as shown in

the illustration.

If using a VCR, go to step

3.

If not, go to step

4.

3

Connect the VCR output to the TV input, referring to

your VCR’s instruction manual.

4

Turn on the camcorder, the VCR and the TV.

5

Set the VCR to its AUX input mode, and set the TV to

its VIDEO mode.

To choose whether or not the following displays
appear on the connected TV

● Date/Time

Set “DATE/TIME” to “AUTO”, “ON” or “OFF”. (

੬ pg. 25, 28)

Or, press DISPLAY on the remote control to turn on/off the
date indication.

● Time Code

Set “TIME CODE” to “ON” or “OFF”. (

੬ pg. 25, 28)

● Indications other than date/time and time code

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”.
(

੬ pg. 25, 28)

NOTES:

It is recommended to use the AC Adapter as the power

supply instead of the battery pack. (

pg. 7)

● To monitor the picture and sound from the camcorder

without inserting a tape or memory card, set the
camcorder’s Power Switch to “A” or “M”, then set your TV
to the appropriate input mode.

● Make sure you adjust the TV sound volume to its minimum

level to avoid a sudden burst of sound when the camcorder
is turned on.

● If you have a TV or speakers that are not specially shielded,

do not place the speakers adjacent to the TV as
interference will occur in the camcorder playback picture.

● When a cable is connected to the AV connector, the sound

is not heard from the speaker.

Connections To A TV Or VCR

1

2

3

4

TV

VCR

Audio/Video

cable

(provided)

To AV

To S

S-Video cable
(optional)

GR-D94US.book Page 17 Monday, November 17, 2003 2:12 PM