GE 45234 GE Home Monitoring Wireless Color Camera System with Receiver - Manual (Page 8)

8
Auto Mode (2 Camera Operation)
To have the receiver automatically switch between
two active channels, fi rst check the receiver is set
to 1/2 position. Next, press the AUTO button on the
top panel of the receiver. The green LED will light
and the receiver will automatically select between
the two active cameras. The monitor will display
images from both cameras alternately.
Cycle Time Setting (Time interval between
camera selections)
The default cycle time for the receiver is preset to
4 seconds. To change the cycle time, press both of
the buttons (Auto and Manual) on top of the receiver
simultaneously. The LED will fl ash; each fl ash adds
one extra second of cycle time. The cycle time can
be verifi ed by the number of fl ashes the LED makes
when you release the buttons—one fl ash equals
one second. Cycle time can be set between 2-30
seconds.
NIGHT VISION
The 45233 Wireless Color Camera features Night
Vision technology. Objects and images can be seen
in little or no light up to 10 ft. The camera uses a
special image sensor that automatically detects
available light levels. It turns on/off the Infra-Red
(IR) LEDS on the front of the camera. These LEDs
provide artifi cial light that allows the camera to