beautypg.com

Timer recording, Recording features, Express timer programing – JVC HR-J4008UM User Manual

Page 11: Watching one program while recording another, Recording resume function

background image

Page 11

March 26, 2001 12:31 pm

Recording Features

Specifying recording length
— Instant Timer Recording (ITR)

During recording, press REC (

7

) on the VCR repeatedly until the

recording length you want appears on the display panel. The
record indicator (

) on the display panel starts blinking.

● Each time you press the button, recording length increases in

30-minute intervals (up to 6 hours).

● The VCR shuts off after recording is finished.

● To cancel an ITR, press STOP (

8

) on the Remote or STOP/EJECT

(

0

) on the VCR.

Watching one program while recording another

During recording…

● If you connect the TV and the VCR only using the RF

connection to view pictures from the VCR, press TV/VCR on the
Remote so that VCR mode indicator goes off from the display
panel. (The TV broadcast being recorded disappears.)

● If you are using the AV connection to view pictures from the

VCR, change the TV’s input mode from AV to TV.

Then, select the channel you want to watch, on the TV.

Recording Resume Function

If there is a power outage during recording (or Instant Timer
Recording, or timer recording), the recording will resume
automatically when the power is restored to the VCR. (No setting
is required for this function.)

Timer Recording

Up to 8 timer recording programs can be made using Express
timer programing method as far as a year in advance. Remember,
the clock must be set before you can program the timer.

NOTES:

If all the 8 programs have already been set, “PROGRAM FULL”

appears on the TV screen.

After timer recording is completed, the VCR turns off

automatically.

You can program the timer recording while a regular recording

is in progress; the menu screens will not be recorded.

To timer-record cable channels, be sure to keep the cable box

turned on with the correct channel selected.

In case of a power failure after programming, the VCR’s memory

backup keeps your selections (if the lithium battery is not
exhausted).

Express Timer Programing

Load a cassette with the record safety tab intact. The VCR turns
on, and the counter is reset, automatically.

– Recording –

HR-J4008UM-EN.fm Page 11 Monday, March 26, 2001 12:31 PM