JVC MX-V508T - Manual (Page 37)

33
English
Using the Timer
kHz
MHz
CONT.
ALL PRGM REC
S.MODE
SLEEP MONO ST CLOCK
RANDOM
A.BASS EX
TA NEWS INFO EON
Timer indicator
Clock, timer-on time etc.
Unit (Front Panel) Display
When the System is being used, the display shows other items as well.
However, we have only shown the items described in this section.
The timers let you control listening and recording functions automatically.
Use the
Remote Control to set the clock and timers. The clock can be set whether the Unit is on or off.
The clock must be set before the timers can work.
Setting the Clock
On the Remote Control
1. Press and hold the SHIFT button until
the following procedure is finished.
2. Press the CLOCK button.
3. Press the SELECT (+) or (–) to set the
time.
4. Press the SET button.
5. Release the SHIFT button.
Remote Control Steps Explanation/Remarks
1. When CLOCK is pressed, the CLOCK indicator on
the display comes on and the clock time blinks.
2. The (+) button increases the time whereas the (–) but-
ton decreases the time. Pressing the button continuously
will change the time in 10 minute intervals.
3. When the time is Set , the time display changes from a
blinking display to a steady display. The clock starts
from 0 seconds.
1
2
3
4
5
Caution:
If a power failure occurs, the clock loses its setting.
The clock time is reset to "
0:00 ". " CLOCK " on the
display starts blinking. The clock must be reset.
1 2 3
4 5 6
7 8 9
REC PAUSE
10 10 FM/AM
A B
DISC
FM MODE
PLAY MODE
7 £ DISC
DISC
– VOLUME +
SHIFT
SLEEP
ECHO
RM-SEV507TU
REMOTE CONTROL
AUX
C D
DECK
CLOCK TIMER
SET
– SELECT +
ON SCREEN
V.INTRO
HIGHLIGHT
SOUND MODE
8 STILL
SELECT RETURN
PREV NEXT
(8) SET
SHIFT
(2) TIMER
(1) CLOCK
(4 –) SELECT (5 +)
EN31-44;MX-V508T[U]/1 98.6.5, 9:57 AM 33