JVC BR-HD50 - Manual (Page 79)

E-75
Item Setting value Description
UP CONV.
MODE
(0405) EFULL (00)
SIDE P. (01)
Up-converts DV/HDV-SD50p input signals or DV/DVCAM/
HDV-SD50p recorded tape playback signals, and sets the video
mode for output from the COMPONENT OUT or HDMI OUT ter-
minal.
FULL : The 4:3 angle of view is stretched to 16:9 and displayed.
Set here to up-convert tapes recorded in 16:9.
SIDE P:The 4:3 angle of view remains, with both sides in black.
Set here to up-convert tapes recorded in 4:3.
HDMI MODE
(0406) EAUTO (00)
RGB (01)
Selects the video mode to output from the HDMI OUT terminal.
AUTO: Automatically outputs video to match the video mode of
the connected monitor. Usually, this setting is used.
RGB : Outputs RGB video. Use this setting when video is not
displayed properly on the connected monitor.
DVI COLOR
(0407) ESTANDARD (00)
ENHANCED (01)
Set this item when connecting the HDMI OUT terminal to a DVI
(Digital Video Interface) terminal on the monitor.
STANDARD : Standard mode. Usually, this setting is used.
ENHANCED: Enhanced mode. Select the video of your choice
(image quality, color density, black blending).
MON.OUT
ASPECT
(0408) EFULL(00)
LETTER(01)
SIDE P.(02)
(SIDE P. is only
for 50 Hz sys-
tems)
For setting the aspect ratio of the output from the HDMI OUT ter-
minal and the COMPONENT OUT terminal. Set according to the
aspect ratio of the monitor.
FULL
: Sets for aspect 16:9 monitors such as multiformat
COMPONENT and HDMI monitors.
LETTER : Outputs aspect ratio 16:9 video such as HDV sig-
nals, to 4:3 and other non-16:9 monitors.
SIDE P. : Shows 4:3 screen as widescreen video blackened
on both sides when playing tapes recorded in
aspect ratio 4:3 in 576/50p mode on the GR-PD1
on a 16:9 monitor.
Memo
Aspect ratio is fixed regardless of these settings when outputting
480I or 576I video.
TEST SIGNAL
(0409) EOFF (00)
CB (01)
Outputs test signals from the built-in video signal generator.
OFF : Does not output test signals.
CB
: Outputs color bar signals.
Memo
These test signals are not controlled for use as standard signals.
PAGE BACK Returns to TOP Menu screen.