JVC BR-HD50 - Manual (Page 58)

E-54
PLAYBACK
Search function
This function searches to the position where the index signal is recorded.
Set “ Q, S” KEY FUNC in the SYSTEM [1/2] Menu screen
to INDEX.
„ To search an index point in the forward direction
from the current tape position:
• Press the SEARCH+ button.
The index position to be searched can be specified by the
number of times this button is pressed. (Max: 99)
„ To search an index point in the reverse direction
from the current tape position:
• Press the SEARCH– button.
The index position to be searched can be specified by the
number of times this button is pressed. (Max: 99)
„ When the SEARCH+ or SEARCH– button is pressed,
the unit fast-forwards or rewinds to the specified
indexed position and start playing.
Memo
z If the interval between index signals is less than one minute, the
function may not work well.
z The specifications for index signal recording varies with the
device used.
This function searches unrecorded parts of the tape.
„ In the STOP mode, press the BLANK button.
• If the current position is at a recorded part of the tape, BR-
HD50 fast-forwards until an unrecorded part is reached
and stops there.
• If the current position is an unrecorded part of the tape,
BR-HD50 will first advance the tape in the forward direc-
tion for confirmation and thereafter rewind and go into the
STILL mode at the last recorded position.
• During a blank search, “BLANK SEARCH” is displayed on
the monitor.
Index search
Setting
Operation
Blank search
INDEX+1
Monitor screen
Index search progressing:
displayed on the screen
(The number denotes the corre-
sponding index position.)
SEARCH
– button SEARCH
+ button
BLANK SEARCH
Monitor screen
BLANK button