JVC FS-GD6S - Manual (Page 18)

14
English Setting the Clock
Without setting the built-in clock, you cannot use Daily
Timers (see page 27) and Sleep Timer.
• To correct a misentry during the process, press CANCEL
(while holding SHIFT) or CLOCK/TIMER. You can
return to the previous step.
1 Activate the clock setting mode.
• If you have already adjusted the clock before, press the
button repeatedly until the clock setting mode is
selected.
2 Set the time.
• Adjust the hour, then the minute.
Now the built-in clock starts working.
To check the current clock time during play
• While playing a DVD and MP3, you cannot check the
clock time (other disc information appears).
Turning Off the Power Automatically
Auto Standby
When Auto Standby is in use, the A.STANDBY indicator
lights on the display.
When disc play stops, the A.STANDBY indicator starts
flashing. If no operation is done for about 3 minutes while
the indicator is flashing, the System turns off (stands by)
automatically.
Sleep Timer
You can set the shut-off time so that you can go to bed
without turning it off yourself.
1 Specify the time (in minutes).
2
Wait until the set time goes off.
To check the time remaining until the shut-off time, press
SLEEP while holding SHIFT.
• If you press the button repeatedly, you can change the shut-
off time.
Remote
ONLY
INFO
CLOCK/
TIMER
CANCEL
SET
TV/VIDEO
DISPLAY Clock
Source information
Remote
ONLY
A.STANDBY
3
On
Canceled
(at the same time)
SLEEP
2
10 20 30 60 90 120
Canceled
150
(at the same time)
FS-GD6S[C].book Page 14 Thursday, March 17, 2005 11:13 AM