JVC FS-GD6S - Manual (Page 12)

8
English Listening to the Radio
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is
tuned in, the frequency stops changing.
• When you repeatedly press the button, the frequency
changes step by step.
To stop searching manually, press either button.
If the received FM station is hard to listen
The MONO indicator lights on the display. Reception will
improve though stereo effect is lost—Monaural reception.
To restore the stereo effect, press the button again (the
MONO indicator goes off).
To preset the stations
You can preset 30 FM and 15 AM stations.
1 Tune in to a station you want to preset.
• You can also store the monaural reception mode for FM
preset stations if selected.
2
Activate the preset number entry mode.
• Finish the following process while the indication on the
display is flashing.
3 Select a preset number for the station you store.
• You can also use the
¡
or
1
button.
4 Store the station.
To tune in to a preset station
1 Select the band (FM or AM).
2 Select a preset number for the station you store.
Remote control: Main unit:
Remote control: Main unit:
INFO
FM AM
GROUP/TITLE SKIP
2 sec.
2 sec.
DOWN UP
Remote
ONLY
FM/PLAY
MODE
Remote
ONLY
Examples:
To select preset number 5, press
5.
To select preset number 15, press
+10, then 5.
To select preset number 30, press
+10, +10, then 10.
• You can also use the
¡
or
1
button.
SET
CANCEL
DIMMER A.STANDBY SLEEP
VFP
3D PHONIC DVD LEVEL
PAGE RETURN
SCAN MODE
1
4
7
10
2
5
8
3
6
9
10
SET
CANCEL
Remote
ONLY
FM
AM
DIMMER A.STANDBY SLEEP
VFP
3D PHONIC DVD LEVEL
PAGE RETURN
SCAN MODE
1
4
7
10
2
5
8
3
6
9
10
FS-GD6S[C].book Page 8 Thursday, March 17, 2005 11:13 AM